Varduino QT
€ 79.00
Ultra sensitive no-lag time variometer combining an ultra-sensitive pressure sensor and an Inertial Measurement Unit (IMU, accelerometer, gyroscope, magnetometer).
Can be connected through Bluetooth or USB to Android and iOS smartphones to run with XCSoar, Flyskyhy, XCtrcack and others.
Shipping within 7 days
Custom fees are possible for deliveries outside of France or Switzerland.
Out of stock
Description
Lightweight and ultra-sensitive variometer
The Varduino QT variometer combines an ultra-sensitive pressure sensor (10cm resolution, 50 measurements/second) and an advanced signal filtering algorithm to provide the user with an unprecedented reactivity.
A 1W speaker with class-D amplifier is built-in for more natural vario sounds and voice notifications.
It is moreover very compact and lightweight and will be the perfect variometer to assist you during hike-and-fly or to be combined with your smartphone
Bluetooth and USB-OTG communication
The variometer can be connected to iOS and Android phones through Bluetooth. Android and iOS. It features a low-energy Bluetooth chip as well as a USB-OTG chip that is recognized by most apps on Android smartphone.
The most popular applications are compatible, such as:
- XCtrack
- XCSoar
- Flyskyhy
Pressure data are transmitted via Bluetooth. Many data formats are available and can be configured using Varduino Manager.
Autonomy
The Varduino QT features a 1200mAh LiPo battery with a flight autonomy of about 40h at maximum volume. The battery can be charged from USB and the charge status is updated on the display even when the device is off.
Customization
The Varduino QT is fully compatible with Varduino Manager. Its sound profile as well as all settings can be easily configured from your computer.
Additional Information
| Weight | 45 g |
|---|---|
| Dimensions | 64 × 44 × 15 mm |
Specifications
| Software features | Varduino QT |
|---|---|
| Ultra-sensitive variometer | |
| Sound notifications | Voice, buzzer |
| Flight tracklog | Altitude and vario |
| Tracklog interval | Max 1point/second |
| Max recording | >50 hours at 1 point/second |
| Cross country navigation | - |
| Flight start detection | |
| Communication with iOS apps | FlyskyHy |
| Communication with Android apps | XCSoar, XCTrack, FlyMe |
| Bluetooth communcation | |
| USB communication | XCSoar, XCTrack |
| Volume settings | 4 levels |
| Vertical speed smoothing configuration | |
| GPS speed smoothing configuration | |
| Direct configuration form Varduino Manager | |
| Sound profile configuration from Varduino Manager | |
| Custom rescue alarm | |
| Units | Metric, imperial |
| Language | English, French |
| Technical features | Varduino QT |
| GPS | - |
| Pressure sensor | 50 recordings/seconds |
| MicroSD card | - |
| Speaker | 1W |
| Wireless communication | Bluetooth 4.2, WIFI |
| Autonomy | >40 hours |
| Battery | 1200mAh |
| Case type | 3D printing - PETG |
| Size (L x W x T) | 64 x 44 x 15mm |
| Weight | 51g |
Related products
-
- Out of Stock
Varduino QT+
- Read more
-
-
- Out of Stock
Varduino GPS
- Read more
-
